California Panel Systems manufactures Aluminum Plate panels in solid 1/8" or 3/16" aluminum materials. All panels are custom fabricated and not limited by minimum production runs or size limitations. Aluminum Plate panels have uniform strength with no risk of delamination or combustion due to flammable components. Panel corners are welded and ground smooth with no visible seams for water intrusion.
These plates are suited for high wind-load applications with internal panel stiffening. The solid materials used to design our aluminum plate panels are highly resistant to incidental dents and punctures and suitable for high-traffic or abusive environments.
They can easily be curved and contoured for radii down to 5" using a variety of fabrication and welding techniques. All finishes are post-applied after fabrication by licensed applicators to provide the highest quality of finish coverage with finish warranties up to 20 years. (Consult factory for specific limitations.)
CPS Plate Panel Capabilities:
- Forming up to 16' lengths
- Back-routing to form crisp tight edges
- Bump forming up to 16' lenghts
- Roll forming up to 8'
- Wall panels
- Infill panels
- Column Covers
- Custom Perforation